Your own Signature model...

[Schecter_dude]

Alright, if you could get any guitar company to build you a custom guitar, what would it be like? Describe! Mine's based on my beloved Schecter C-1... here we go:


Schecter Diamond Series "Mike Reid Signature"

(Body shape, neck, nut & fingerboard specs identical to C-1)

Construction: Bolt-on
Body: Mahogany
Neck/Fingerboard: Maple/Rosewood
Scale: 24 3/4"
Inlays: "Zero" on 12th fret
Hardware: Gold
Bridge: Tune-o-Matic w/ String-thru-Body
Tuners: Grover
Binding: Gold (Body/Headstock)
Frets: 24 Jumbo
Electronics: Seymour-Duncan
Finishes: Gloss Black

Notes:
Pickup Configuration:
Seymour-Duncan "Duncan Distortion" SH-6 Humbucker at Bridge position
Seymour-Duncan "Duncan Distortion" SH-6 Humbucker at Neck position

Electronics:
One volume control for Bridge pickup
One volume control for Neck pickup
Master tone control

Other:
Equipped with Dean-Markley "Blue Steel" Medium Gauge stings

[Schecter_dude]

Bass guitars as well!!!!

[smfulla]

Damn that sounds cool

ESP Sharkfin V (They don't make this body shape, but they would for me, it's like the RR series for jackson but with a little bit of a longer tail.) "Kepa Tairua Signature"

Contruction: Neckthru
Body: Alder
Neck/fingerboard: Maple/Ebony
Scale: 25.5
Inlays: Bone hand giving the fingers. My name at 24th
Hardware: Black
Bridge: Floyd Rose Licensed Tremolo
Tuners: Dunno, sumthing good =]
Binding: Dunno what it is?
Frets: 24 jumbo
Electronics: EMG I guess
Finish: Gloss Black/Mat Black/Dark Grey

Notes:
Pickup Config:
EMG 81 Active Humbucker @ Neck
EMG 81 Active Humbucker @ Bridge

Electronics:
One Master Volume
One Master Tone
Pickup switch

Other:
Strung with Ernie Ball Super Slinky 0.09's
1 bag of Jim Dunlop Jazz II picks (coz I always lose mine =])

[ZakNafien]

ok im too tired to list full specs but for anyone who's seen some artwork for the games workshop noise marines i'd want a guitar built to look like a blastmaster :)

[Levinson Blade]

A Levinson Blade RH4 with my name on the head stock

SD Cool / Cool / Hot pickups

Thats it

[ESP_Viper]

Well I'd have a bunch... but I could only have one I'd take a Jackson Rhoads.

25.5" scale length.
24 extra jumbo frets
Mahagony body and mahagony neck
Neck Through.
No inlays (dots on the side of the neck though)
Ebony Fret Board
Black w/ red ghost flames.
Black pick guard.
Floyd Rose Original Tremolo
White neck and headstock binding.
EMG 81 at the bridge, Seymour Duncan Alnico 2 Pro HB at the neck.
2 Volume, 2 tone (one push/pull for the duncan to coil tap). 3-way gibson style selector on the top of the body. Also the EMG impedance matching circuit to allow the duncan and EMG to work together.
Piezo pickup for acoustic tones and its own seperate volume and tone controls w/ an on/off swtich for it.
Two outputs (piezo out and pickups out).
Jim Dunlop Strap Loks.
My name on the Truss Cover
Black hardware.
Black metal knobs.
Jackson normal, angled, pointed headstock.

Thats all I can think of...

[Mason]

Mine would be a Signiature Gibson Les Paul!

Construction: Bolt on
Body: Carved AAA grade Figured Maple top, Mahogany bottom
Neck: Mahogany
Fretboard: Rosewood, 24 frets, Trapezoid Pearl inlays, Name
Scale/Nut Width: 24 3/4", 1 11/16"
Binding: Sigle Ply top and Fretboard
Bridge/Tailpiece: Tune-o-Matic/Stop Bar
Hardware: Black Chrome, White Pickguard
Pickups:EMG-85 Neck, EMG-81 Bridge
Tuners:Grover
Finishes: Hand Stained Translucent Black (see Joe Perry signiature Les Paul)

Electronics: 2 Volume, 2 Tone, 3 Way Pickup Selector

Other: Strung with Ernie Ball Slinky's 0.09, Bag of Jim Dunlop Heavy Guage Picks (I have the same problem with losing my picks, its like when I drop them they fall into some kind of Blackhole and dissappear!) Locking Strap Piece, Signiature Custom Length Guitar Strap ( I wear my guitar relatively low, and im 6'7" so I need a special strap)

I also want my name on the headstock!

[smfulla]

Might I suggest using and Ernie Ball XL strap. I'm about 6ft2 and I can get it swingin below my pelvis. I don't play it there tho.

[Mason]

Ill have to check it out on my next visit to the good ol' Guitar Center over in Lynnwood. My current strap just aint cuttin' it for me. Thanks smfulla, for the advice!

[The Fury]

Well, I dont know enough about the electronics or mechanics to choose all the specs, but one thing I'd definately have would be some custom artwork maybe a bit of Jackson Pollock or David Hockney.

But it would have to be a Strat style body and headstock, cause the Strat is just a work of art. It should be in a gallery.:)

[treyphish]

give me trey anastasio's guitar of phish....those of you who follow the band know.......don't you!!!!

sharin in the groove.

[i like strats]

well.... if I had to pick one.... It would be the Jackson rr1

I'd leave everything standard for the model, exept for the tremolo I would want a steinberger transtrem fitted on it somehow.

[Pezcore]

i'd be quite happy with the standard Fender Jaguar, as close to guitar perfection as is possible.